Install these bits and run along a wooden workpiece to produce an end grain cut that leaves the tongue. The smaller bit produces the long grain cut to make the groove. Tongue and groove joints are then installed with panels to make cabinetry and used in various other applications to make strong wooden joints.
Industrial-grade bits with C3 micro-grain tungsten carbide tip for router use
The carbide tip cutters are for creating clean and balance cuts on planks
Has a heat- and build-up resistant Teflon layer
Durable and hardened steel and designed with anti-kickback features
Use on plywood, MDF, particle boards and more
Made from C3 carbide alloy with a cutting thickness of 1/4 inch or 6.35mm and a shank diameter at 1/2 inch or 12.7mm
Handling time>> Ship within1-3 daysafter payment
Payment>>Credit Card / PayPal
Returns>> Fast refund,100% Money Back Guarantee
At Ironman Store, we truly offer the most stunning, trendy highest-quality products in the world. We will do WHATEVER it takes with outstanding customer service support to assist everyone as we highly value our customer satisfaction with absolute ZERO risk.
worked great to router panels and the rails for a chest I built.
Works great! I glue large pieces of wood together to make big table planks and I usually just use the groove and cut loose tenons out of scrap stock so I don't lose a half inch of material.
I would give them a 5 but I used them on 1-1/2 southern yellow pine and the one leaves a thin layer of wood on both edges & they fight so tight I've been using a 3lb sledge to put them together. but they do a nice job cutting and hold up pretty good.
These GREAT Router bits are excellent and I very highly recommend them. They are precisely matched, very sharp and easy to use both mounted in a router table and Free Hand.
These bits are pretty good in my opinion I bought then to do some hardwood flooring and ended up using them for many other things as well. They have stayed pretty sharp so far and really do what I ask of it without problem. I would recommend these to a fellow woodworker.
used these to make my wood flooring out of 6'' x48'' strips of BC sanded plywood. The resulting joint is snug and looks great. I did manage to chip the carbide tips a bit at around 2500 feet of cutting but was still able to use them for the remaining 1000 feet without an issue.
Very good router bits, and I used many bits and was always good, any way I’m a weekend woodworker so I recommend this bits for DIY or weekend woodworkers.
I am way more than happy with these bits, including both the quality and the price.
For the money these bits are awesome. I highly recommend these bits for any weekend wood worker or beginner. The low cost is excellent so your able to learn without breaking the bank.